Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 52mm chainline / 3mm offset for boost spacing
Manufacturer Wolf Tooth
Manufacturer Part Number OVAL-RFC32-BST
UPC 812719025522
Model Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings
Chainring Tooth Count 32 tooth
Direct Mount Chainrings Mount Style RaceFace CINCH
Chainline/Hub Compatibility
141/148 Boost Hubs
Chainring BCD
Direct Mount CINCH
Defined Color
Black
Direct Mount Type
Direct Mount CINCH
Drivetrain Speeds
9
Drivetrain Speeds
10
Drivetrain Speeds
11
Drivetrain Speeds
12
Material
Aluminum
Offset
3
Ring Position/Type
Chain Retaining Single Ring
Round or Oval
Oval
Tooth Count
32