Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

SKU: WIND-HUENOBLK28126 Product qualifies for Free Shipping White Industries, Eric's Eccentric ENO Black Hub, 28 hole-126mm


This hub was the brain child of one of our customers located in New York. Eric contacted us one day with an idea to make an eccentric fixed gear hub. The goal was to have a fixed gear hub that could be used with vertical drop outs without needing a chain tensioner. We were excited about the idea and began engineering the hub that we feel will transform the fixed gear market. The hub houses two sealed cartridge bearings, an aluminum axle, and stainless steel axle ends. The key is the location of the fixing bolts located in the axle ends. The bolts are offset 7.5mm from the center of the axle. Normally the fixing bolts are centered to the axle. Once in the frame the axle ends can rotate 180 degrees which gives 15mm of travel. Therefore, by rotating the axle ends you can attain proper chain tension. The eccentric ENO is a flip flop design allowing the rider to use a White Industries specific fixed gear on one side and a standard english threaded freewheel on the other. The hub can be ordered in 32h or 36h for frame spacings of 126mm, 130mm or 135mm.

Manufacturer  White Industries
Manufacturer Part Number  WIND-HUENOBLK28126
Model  White Industries Eccentric Hub
Rear Hub Style  Single Speed
Rear Hub Axle Type  10x126mm Bolt-on
Rear Hub Spoke Count  28 hole
Currently Out of Stock
Sorry, 'White Industries, Eric's Eccentric ENO Black Hub, 28 hole-126mm' is currently out of stock. Please check back later or contact Bikeman for an expected availability date. Refer to our Shipping Terms for more information.